- Atomic absorption spectrophotometer (flame and graphite furnace)
- Automated titrator and Karl Fisher
- Capillary electrophoresis
- Differential Scanning Calorimeter (DSC)
- Fluorescence Spectrometer X (XRF)
- FTIR infrared spectrometer with cell specialized in gas and biogas analysis
- Fluorimeter
- Gas chromatograph (GC-TCD) for gas analysis
- Gas chromatograph (GC-FID)
- FTIR Infra-Red Spectrometer For Solid And Liquid Samples
- Ion chromatography
- Gas chromatograph combined with a mass spectrometer (GC-MS)
- High-performance liquid chromatography combined with an ion-trap mass spectrometry (LC-MS)
- High-Performance Liquid Chromatography (2 Units, One Of Which Is Equipped With A Fraction Collector)
- High-Performance Liquid Chromatograph With An ELSD Detector (Electrospray Light Scattering Detector)
- Kjeldahl analyzer (total nitrogen and ammonia)
- Spectromètre d’émission optique muni d’un plasma à couplage inductif (ICP-OES)
- Thermogravimetric analyzer coupled with mass spectrometer (TGA-MS)
- Total organic carbon analyzer
/// Features:
- Processing volume: 1 to 4 L
- Operating pressure up to 600 psi
- Feed flow ranging from 1 L/min to 6 L/min
- Membrane coupons for MF, UF, NF, and OI
- Can be adapted to forward osmosis
/// Samples:
- Liquids: effluents, residual liquids, process waters, fluids, etc.
/// Examples of applications
- Scanning and selection of the type of membrane to be used
- Optimization of membrane filtration parameters: flow, pressure, temperature
- Studies of the effects on liquids and membranes (precipitations, clogging, pressure drop, etc.)
/// Features:
- Enables the simultaneous testing of several flocculation / pre-filtration conditions
/// Examples of applications:
- Separating and concentrating metal nanoparticles
///Features :
- Filtration system with three ceramic membrane chambers measuring 110 cm in length by 2.5 cm in diameter (microfiltration and ultrafiltration)
- Filtration capacity of 150 L to 200 L per hour; 600 L double walled tank connected to a cooling system
- Pre-filter; Pump with a maximum operating capacity of 3500 rpm (8 horse power).
/// Samples :
- Liquids (effluents, residual liquids, fluids, liquid waste, liquids resulting from chemical processes, and so on)
- Capacity to process samples of up to 1 000 L.
/// Examples of applications :
- Industrial effluent treatment; Molecule separation, concentration, and purification (organic or inorganic)
- Recycling of harmful biomass
- Extraction of recyclable organic compounds
- Recycling of waste products (polyethylene glycol, cutting fluids, essential oils, etc.)
- Separation of nanoparticles from dissolved salts in order to characterize the nanoparticle content - Nanoparticle and other nanomaterial concentration.
/// Features:
- Pumps with a capacity of 12 to 20 gallons per minute
- 50 gallon/minute recirculation pumps
- 7.5 horsepower (3500 rpm) pumps
- Spiral-wound membrane chamber (measuring 40 inches in length by 8 inches in diameter)
- Filtration capacity of 600 L per hour
- 100 to 1 000-litre tank
- Prefilters
/// Samples:
- Liquids (effluents, residual liquids, fluids, liquid waste, liquids generated by chemical processes, etc.)
- Capacity to treat liquids by micro-, ultra-, nanofiltration, and reverse osmosis
/// Examples of applications:
- Separation of nanoparticles from dissolved salts in order to characterize the nanoparticle content
- Nanoparticle or other nanomaterial concentration
- Purification of industrial effluents
- Separation, concentration, and purification of molecules (organic or inorganic)
/// Other test benches available:
- Two filtration systems with 2 spiral-wound membrane chambers measuring 8 inches in diameter
- A filtration system with a spiral-wound membrane measuring 4 inches in diameter
- A filtration system with a spiral-wound membrane measuring 2 inches in diameter