/// Based on 4 Sourirajan-type cells, this unit allows you to:
- Characterization of industrial membranes or in situ manufacturing (14 cm diameter coupon) Hyperfiltration, nanofiltration, ultrafiltration type (see characterization method).
- Effect of tangential flow.
/// Other characteristics:
- Mounting material on a rolling trolley (standard door passage).
- 4 Sourirajan-type cells.
- 10 liter tank Box for micro filtration cartridge.
- Piston diagram type pump (1000 Psig, 4gpm) pressure independent of the flow rate.
- Temperature, pressure, flow sensor.
- Pressure gauge, flowmeter and thermometer.
- Pressure control valve.
- Safety valve with maximum pressure adjustment.
- Data acquisition and control system.
- High efficiency variable speed motor.
- Electronic speed variator.
- Computer and software for control and data acquisition.
Pilot for the treatment of industrial wastewater containing volatile compounds, for both pedagogy and research and development. It is a flexible equipment that allows feasibility studies on different types of contaminated water. It is composed of :
- 10 l capacity polyethylene feed tank with removable lid
- Total drain valve at the bottom of the tank
- Raw water supply valve
- Variable flow centrifugal feed pump
- Supply pipe at the top of the PVC column
- Control valve and flowmeter on filter supply
- A filtration column on the air stripping bench and modifications on the bench to accept this filtration column
- Gas chromatography and mass spectrometry
- Ion chromatography
- Atomic absorption spectrometry with flame
- Zetameter
- Infrared spectroscopy
- Total organic carbon analyzer
- High performance liquid chromatography
- UV-Visible spectrophotometer
- Solid phase extraction equipment for hydrocarbons
- Basic analytical equipment
- Oil & grease analyzer
- Activated carbon adsorption column
- Column for aeration tests
- Respirometer
/// Description :
- A 55 L / min, 15 psig capacity coalescing separation vessel, SS316 stainless steel and acrylic construction with internal support for TORR ™ coalescing cartridge and safety valve
- A centrifugal type electric water pump, 220 VAC, 15 amp
- A 200-liter plastic back-up tank with removable cover for storing and recirculating water
- Set of 1 '' industrial piping, flexible for interconnection of the various elements of the system
- Set of valves for component isolation and for pump flow control
- Pressure gauges at the entry and exit of the vessel
- A 48 '' x 48 '' stainless steel table with retention walls in the event of a system leak on which all system components rest
- 10 sealing washers for replacement
- Made and assembled in Quebec
- Works with TORR ™ coalescing cartridges. Model TC-008-2, 6 '' diam x 20 '' high, nylon and nitrile gaskets
/// Description :
- Pilot unit for membrane filtration tests (ultrafiltration, nanofiltration, reverse osmosis).
- Water supplied by a 0.37 kW (1/2 hp) pump.
- Pretreatment through two disposable 24 and 5 µm microfilter cartridges.
- The clogging of the membranes is monitored using two manometers.
- System equipped with a submersible centrifugal pump capable of working at a maximum of 3105 kPa (450 psi) connected to a recirculation pump with a capacity of 110 L / min. The pump is operated with a 2.24 kW (3 hp) and 230 V motor.
- The unit includes two membrane reactors powered in parallel.
Equipment in the pilot:
- Pollution storage tank
- Peristaltic feeding pump
- Anoxic tank
- Mixed liquor recycling pump
- Aerobic basin
- Sludge recycling pump:
- Clarifier
- Hot circuit
- Air circuit
- Water supply
- PH adjustment
Equipment in the pilot:
1. Tanks of chemicals
2. Circulation pump
3. Dosing pumps
4. Screed separator
5. UASB reactor
6. Secondary clarifier
7. Mixing tank
8. Process diagram
9. Control cabinet
Pilot for the treatment of industrial wastewater for pedagogy and research and development. It is a flexible equipment that allows feasibility studies on different types of contaminated water. It is composed of :
- 200 L graduated polyethylene feed tank with removable lid and complete drain valve at the bottom of the tank and an isolation valve.
- Variable flow supply pump from 0 to 1 33 / h equipped with an isolation valve and pressure gauge on discharge.
- Supply flowmeter 0 to 500 Llh with bypass.
- 100 L capacity transparent PVC float with motor and scraper for the foam.
- Sludge recovery tank with a capacity of 50 liters.
- Raw water pressurization system with pressure tank with measurement of water flow (0-500 L / h) and air flow (0-500 L / h), for air regulator inlet and the stop valve.
- Flow recirculation pump 0-500 L / h with isolation valve and discharge pressure gauge.
- 200 L treated water recovery tank
Unit capable of generating a variable amount of ozone of 1-60 g of O3 / h. It uses dried air or oxygen as the service gas. It is equipped with a filter, a water supply pump to process variable flow 0-60 l/min and an automatic control.